Author
brad anderson jrCreated
May 16, 2024 12:27 AM
Updated
May 23, 2024 11:52 PM
Status
In Progress
Brand
xTool
Device
xTool F1
Format
Physical
Please review this document thoroughly before using the Lens Halo Light. It contains crucial information about the installation and operation of the light, which will ensure optimal performance and longevity of the product.
Table Of Contents
Product Overview
In Progress
Installation Instructions
In Progress
Operating Instructions
In Progress
Technical Specifications
Filament
Carbon Fiber Reinforced PETG (PETG-CF) - a type of plastic material used in 3D printing. It is PETG (Polyethylene Terephthalate Glycol-modified) plastic that has been reinforced with carbon fibers to enhance its strength and stiffness.
Physical Properties
Density | 1.25 g/cm³ |
Vicat Softening Temperature | 85 °C |
Heat Deflection Temperature | 74 °C |
Melting Temperature | 225 °C |
Melt Index | 19.3 ± 2.4 g/10 min |
Mechanical Properties
Tensile Strength | 35 ± 5 MPa |
Breaking Elongation Rate | 10.4 ± 0.6 % |
Bending Modulus | 2910 ± 260 MPa |
Bending Strength | 70 ± 5 MPa |
Impact Strength | 41.2 ± 2.6 kJ/m² |
Physical Dimensions [Assembled]
Length: | 5.1875 in |
Width: | 5.1875 in |
Height: | 1.625 in |
Net Weight: | 0.2 kg |
FAQ
- In Progress
Support
If you require further assistance or have any questions regarding the product, don't hesitate to contact me. You can reach me through Etsy or my email. I'm here to help and assure you have the best possible experience with our product.